Sew micro heat regeneration dryer adopts pressure swing adsorption high-temperature regeneration principle to dry compressed air. It is a kind of energy-saving and high-efficiency dryer developed by absorbing the advantages of hot regeneration and no heat regeneration. The regenerated gas is used to purge and regenerate adsorbent in the adsorption tower after the temperature of the micro heater rises, which can save the regeneration gas consumption and take effect again Good fruit and longer working time.
Set up automatic charging and equalizing process steps to reduce the impact of air flow on adsorbent.
It is easy to change desiccant in flange filling port and discharge port.
The scientific design of flow rate and the selection of high-quality adsorbent ensure the stability of dew point of finished gas.
Special gas distributor ensures uniform distribution of air flow, makes compressed air fully contact with adsorbent, and prevents "dead angle" and "tunnel effect" of adsorption.
It adopts PLC program controller, LCD display, touch button, and can adjust the working regeneration time according to the working condition.
Drying and regeneration status display, automatic constant temperature control, energy saving.
Control the gas source from the dry air at the outlet of the adsorption tower to avoid oil and water pollution, control the valve and gas path, and prevent valve rust and gas path blockage.
High quality heating and control components ensure long-term and reliable operation of the equipment.
High quality pneumatic valve can be opened and closed quickly with high efficiency and durability.
Scan to contact us
Company Address: No. 9 Changkou East Street, Fuyang District, Hangzhou, Zhejiang Province
Phone：0571-86725999 15168371999 （MR.CHEN）