24-hour after-sales service phone

Phone:0571-86725999 

产品banner
Your current location: Home >> Products >> Compressed air purification equipment

Sew micro heat regeneration compressed air dryer

2020-10-28 13:02:08
times
Sew micro heat regeneration compressed air dryer
Details:

working principle:

Sew micro heat regeneration dryer adopts pressure swing adsorption high temperature regeneration principle to dry compressed air. It is a product developed by absorbing the advantages of hot regeneration and no heat regeneration, and is a kind of energy-saving and high-efficiency equipment

The regeneration gas is used to purge and regenerate the adsorbent in the adsorption tower after the temperature of the micro heater is increased. The regeneration gas consumption can be saved, the regeneration effect is good and the adsorption working time is longer.

Product features:

Set up automatic charging and equalizing process steps to reduce the impact of air flow on adsorbent.

It is easy to change desiccant in flange filling port and discharge port.

The scientific design of flow rate and the selection of high-quality adsorbent ensure the stability of dew point of finished gas.

Special gas distributor ensures uniform airflow distribution and sufficient compressed air and adsorbent

Contact to prevent adsorption "dead angle" and "tunnel effect".

It adopts PLC program controller, LCD display, touch button, and can be adjusted according to working conditions

Adjust the working regeneration time.

Drying and regeneration status display, automatic constant temperature control, energy saving.

Control the air source from the outlet of adsorption tower to avoid oil and water pollution

Gas path, to prevent valve rust and gas path blockage.

High quality heating and control components ensure long-term and reliable operation of the equipment.

High quality pneumatic valve can be opened and closed quickly with high efficiency and durability.

Technical parameter:

Working pressure: 0.6 ~ 1.0MPa (1.0~3.0MPa can be provided according to user's requirements)

Intake air temperature: ≤ 45°C

Pressure drop: ≤ 0.023mpa

Atmospheric dew point of product gas: ≤ - 40°C (alumina), ≤ - 60°C (molecular sieve)

Regeneration gas consumption: ≤ 4 ~ 6%

wholesale of sew micro heat regeneration compressed air dryer


Next up: SGF dust filter2020-09-30

Recent browse:

Contact us

24-hour after-sales service phone

Phone:0571-86725999 

Company Address: No. 9 Changkou East Street, Fuyang District, Hangzhou, Zhejiang Province

Phone:0571-86725999   15168371999 (MR.CHEN)

E-mail:shenger@zjseqt.com